Crimestopper Security Products EZ-10 Automobile Alarm User Manual


 
REMOTE CONTROL DIAGRAMS
#1
#2
#3
LOCK
ENGINE
UNLOCK
VEHICLE #2
FLASHLIGHT
START/STOP
EZ-30
Engine
Start/
Stop
Flashlight
Vehicle
#2
EZ-10 System
EZ-30 SYSTEM
The transmitter supplied with the EZ-30 system has 5 buttons total. The button configuration of the EZ-30 is
Factory-set and unchangeable. See Page 11 for additional information on how to use your remote to operate a
second vehicle equipped with an EZ-30 or EZ-10 system.
EZ-10 SYSTEM
The transmitter supplied with the EZ-10 system has 3 buttons total. The button configuration of the EZ-10 is
Factory-set and unchangeable. See Page 11 for additional information on how to use your remote to operate a
second vehicle equipped with an EZ-10 system.
“COOLFLASH” BLUE LED FLASHLIGHT
Your remote control is equipped with a handy mini LED “CoolFlash” flashlight. Press the upper side button of
your remote control to active the remote’s LED indicator as a flashlight.
NOTE: REMOTE START BUTTON DELAY
There is a deliberate delay built into the system on the remote start button to help prevent accidental remote
starting from the remote being in your pocket or purse. During normal use push the button deliberately for at least
a 1-second. If you press the remote start button too quickly, the system may not accept the signal to start the
engine.
3