Clifford concept 30 Automobile Alarm User Manual


 
What each button/channel does
Your Concept 30 remote controls come pre-programmed so that certain channels
command certain functions. If you wish, you can actually assign any channel to any
function (see pages 16–18). The following chart indicates what each remote control
channel number does, and how to transmit each channel number.
Factory settings of the 12 remote control channels
Transmitting
channel
number:
Causes the system to:
Press the
LevelShift
button?
How
many
times?
Press
button
number
1
arm or disarm and lock or unlock the doors no 1
2
pop the trunk* (if the system is disarmed)
AND
turn on the headlights* or close the windows* (if the system is armed)
no 2
3
silently arm or disarm no 3
4
activate optional accessory function #1 no 4
5
activate optional accessory function #2 yes once 1
6
activate optional accessory function #3 yes once 2
7
activate optional accessory function #4 yes once 3
8
activate optional accessory function #5 yes once 4
9
activate optional accessory function #6 yes twice 1
10
activate optional accessory function #7 yes twice 2
11
activate optional accessory function #8 yes twice 3
12
activate optional accessory function #9 yes twice 4
* May require additional wiring.
TO ARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) once. You will hear two chirps and
the parking lights will flash twice. The dashboard LED will
flash repeatedly and the car doors will automatically lock.
TO DISARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) again. One chirp and one flash of
the parking lights will confirm disarming. In addition, the car
doors will automatically unlock and the interior lights will
turn on and stay on for 30 seconds or until you start the
engine, whichever occurs first..
continued . . .
7