Filter
Top Products
Your 4-button/12-channel remote controls
The 4-button/12-channel remote control is an ultra-sophisticated miniature radio
transmitter powered by a tiny 12-volt battery. Range is up to 100 feet. Obstructions,
electrical interference, weather conditions or a weak battery will reduce the range.
Your 4-button/12-channel remote control is the key to your Concept 30. It incorporates
Clifford’s proprietary Anti-CodeGrabbing™ (ACG) technology with Random Code
Generation for the ultimate in protection against thieves “code-grabbing” devices
(see page 9). You’ll use the remote control to arm and disarm the system, lock and
unlock the doors, activate the system’s panic feature, turn on the headlights and
command options such as a remote trunk release and remote engine starter.
How to use your keychain remote control
Your remote control can command up
to 12 different system functions and
options. It’s like having a TV with 12
channels. You change channels (func-
tions) with your keychain remote. But
instead of putting 12 buttons on the
remote, we made it easy: First, the
button you use the most — button 1 to
arm, disarm,lock and unlock — is
larger than the others. Buttons 2, 3 and
4 are the smaller buttons to the right, below and left of button 1. The LevelShift
button on the side permits you to select channels 5–12 with the same four buttons.
To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For
instance, to transmit channel 3, press button 3. While you transmit, the LED
indicator will blink once every second: this indicates level 1.
To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This
shifts buttons 1–4 to level 2 (channels 5–8). Then press the desired button
within the next 7 seconds. For instance, to transmit channel 5, press the
LevelShift button once, then press button 1. While you transmit, you’ll notice
that the LED indicator blinks twice, pauses, blinks twice, etc.: this indicates
level 2.
To transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts
buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button
within the next 7 seconds. For instance, to transmit channel 10, press the
LevelShift button twice, then press button 2. While you transmit, you’ll notice
that the LED blinks three times, pauses, blinks three times, etc.: this indicates
level 3.
NOTE: One second after you stop transmitting level 2 or level 3 (channels 5–12),
the remote control automatically returns to level 1 (channels 1–4).
6