Clifford concept 30 Automobile Alarm User Manual


 
Feature
Factory
setting
# of
momentary
taps
Secondary
action
Program
completion
confirmation
Result
Siren
Duration
30 sec.
10
1 chirp 3
seconds after
last step
Change duration from 30 to
60 seconds or vice-versa
FACT —
False Alarm
Control and
Test
ON
12
1 chirp 3
seconds after
last tap
Change state from
OFF to ON or vice-versa
Headlight
Reminder
ON
13
1 chirp 3
seconds after
last tap
Change state from
OFF to ON or vice-versa
Add a New
Remote to
Channel 1
(arm/disarm)
14
Press remote control button 1
2 chirps
Button 1/channel 1 code
of the new remote control
has been memorized
Add a New
Remote to
Channel 2
(optional
remote
accessory)
15
Press remote control button 2 2 chirps
Button 2/channel 2 code
of the new remote control
has been memorized
Add a New
Remote to
Channel 3
(silent
arm/disarm)
16
Press remote control button 3 2 chirps
Button 3/channel 3 code of
the new remote control
has been memorized
Add a New
Remote to
Channel 4
(optional
remote
accessory)
17
Press remote control button 4 2 chirps
Button 4/channel 4 code
of the new remote control
has been memorized
Built-In
Timer
30 sec.
18
3 seconds later, 1 chirp will
indicate that the timer has
started. When the desired
interval has passed, turn off
the ignition key.
Set to any interval between
1 sec. and 2.5 min.
WARNING: If the built-in timer controls window/sunroof closure on your car,
DO NOT change the timer setting! This requires installer-only programming.
Changing the value will adversely effect operation and may cause damage.
17