Filter
Top Products
AutoLock/AutoUnLock™
Concept 30 automatically locks the doors when you begin driving, and unlocks them
when you turn off the ignition. If you prefer, you may turn off the AutoLock/
AutoUnLock feature. See the User-selectable features section on pages 16–17.
How to interpret the LED status indicator
The LED on your car’s dashboard or console will inform you of the system status:
LED Condition Meaning
Off
System is disarmed and in normal operating mode (i.e., valet mode is off)
On
Valet mode is on, the vehicle can be driven or serviced without having to disarm
Flashing
System is armed and protecting your vehicle
Pause between flashes
Either a malfunction (see page 12) or an intrusion was attempted (see page 14)
High-output Insignia™ Siren
Clifford Electronics designed the Insignia Siren to provide greater performance and
teen times the reliability of all other manufacturers’ look-alike, sound-alike sirens.
QuietChirps™: You can control the volume of the normal arm/disarm chirps. As
shipped from the factory, your system issues full-volume chirp
acknowledgments. If you prefer, you may reduce the chirp volume to a level
that is clearly audible, yet less obtrusive. See the User-selectable features
section on pages 16–17.
Long-term chirp silencing: Whenever you wish, you may silence your Concept
30’s arm/disarm chirps until you wish to restore them. The parking light
flashes will continue to provide visual confirmation of remote controlled
arming and disarming. See User-selectable features on pages 16–17.
Remote controlled chirp muting: Remote controlled chirp muting capabilities
are especially valuable when parking late at night in a quiet residential area. To
arm or disarm silently, simply press button 3 (channel 3) on your remote control
instead of the usual button 1 (channel 1).
Siren duration: When the system detects an intrusion attempt, the alarm is set to
sound for 30 seconds. However, if you prefer, you may change it to 60
seconds. See the
User-selectable features
section on pages 16–17.
SmartPowerUp™
If power is ever removed and restored in a theft attempt, SmartPowerUp automatically
re-arms the system, sounds the siren, flashes the parking lights and electronically
interrupts the starter. To disconnect power for servicing, simply insert your key into
the ignition and turn it to the “ON” position before reconnecting power. Concept 30
recognizes this an an authorized power reconnection and will not alarm.
15