Filter
Top Products
2277
©
2005 Directed Electronics—all rights reserved
PPrrooggrraammmmiinngg OOppttiioonnss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require additional installation labor. This system's programming
options are listed below, with the factory default settings in bold:
■
1122,,
24, or 60 minute run time. your system can be pro-
grammed to allow the vehicle to run for 12, 24, or 60 min-
utes when remote started.
■ 3, 6, 9, or
1122
minute timer mode run time. Your system can
be programmed to allow the vehicle to run for 3, 6, 9, or 12
minutes when remote started in timer mode. Can be set up to
16 minutes by your installer.
■ Comfort closure is a programming option which closes the
vehicle’s windows after remote locking.
■ Parking lights
ffllaasshhiinngg
or constant. Your system can be pro-
grammed to either flash or to turn on the parking lights con-
stantly during the entire remote start operation.
■ Passive Mode or
AAccttiivvee MMooddee
. In Passive Mode the Failsafe
®
Starter Kill will automatically activate 30 seconds after the
ignition has been turned off.
■ Ignition switch-controlled door-locking
oonn
or off. With this
feature on, the doors will lock 3 seconds after the ignition
key is turned on, and unlock when the ignition key is turned off.