Clifford Model RSX1.5 Automobile Alarm User Manual


 
2211
©
2005 Directed Electronics—all rights reserved
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehi-
cle with the climate control system. If interior heating or cooling
is desired, the climate controls must be preset, and the fan blower
must be set to the desired level prior to remote starting the
vehicle.
IIMMPPOORRTTAANNTT!!
(1) Never remotely start the vehicle with the vehicle
in gear, and (2) Never remotely start the vehicle with the key in the
ignition.
TToo rreemmoottee ssttaarrtt tthhee vveehhiiccllee::
1. Press on the transmitter 2 times.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. Release the buttons as soon as the parking lights flash.
(In gasoline vehicles, the engine will start 4 seconds after
the parking lights flash. In diesel vehicles, the engine will
start when the WAIT-TO-START indicator on the vehicle's dash
goes out or the timer has expired.)
4. Once the vehicle has started, it will run for the pre-program-
med period of time (12, 24, or 60 minutes) or until a shut-
down input is triggered.
RReemmoottee SSttaarrtt