Filter
Top Products
33
© 2006 directed electronics
2. Decrease Sensitivity—Press and release the button to
decrease shock sensor sensitivity by one step. The siren and
LCD remote will emit 1 chirp for each step decreased in
adjustment (1 vibrate if programmed). The shock sensor
adjustment reaches minimum sensitivity (sensor Off ) when
the indicator bar is empty
.
3. Testing Sensor—Use the heel of the palm of your hand to
strike the door pillar of the car after any increase or decrease
in adjustment. The siren will chirp once if the impact was
great enough to generate a full trigger. Pre-warn level is set
automatically. When desired setting is reached, sensor
adjustment mode can be exited.
BAR 1
BAR 10
SENSOR LEVEL SETTING
SHOWN AT MID-POINT
nnoottee::
When the shock sensor adjustment mode is exited,
the bar indicator will indicate continuously. For example if
level 15 was being set (bars 1 through 7 indicating contin-
uously, and bar 8 flashing), upon exiting adjustment mode
bars 1 through 8 will indicate continuously.