Filter
Top Products
3
© 2008 Directed Electronics - all rights reserved
Using your system
Arming your system
You can activate, or arm, the system by locking the doors with your fac-
tory keyless entry transmitter. When the system arms, you will hear a
short siren sound and see the indicator lights flash once.
While the system is armed, the status LED will flash about twice a sec-
ond, to indicate that the system is actively protecting your vehicle.
If you hear a second short siren sound after arming, and see the status
LED flashing in groups, this second short siren sound, a Bypass
Notification, means a zone such as a door, boot or bonnet is open. Refer
to the Diagnostics section for more information.
G330X_1-3_2008_02B.qxd 2/14/2008 4:28 PM Page 3