Filter
Top Products
10
©
2004 Directed Electronics, Inc.
You can also enter or exit Valet Mode by using the remote
transmitter:
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The LED system status indicator will light solidly if you have
entered Valet Mode and will turn off if you have exited Valet Mode.
Diagnostics
The microprocessor at the heart of your system has the ability to
constantly monitor all of the switches and sensors connected to it.
It can detect any faulty switches or sensors and prevent them from
disabling the entire system. It can also record and report any trig-
gers that occur when you are away from your vehicle.
If the system is armed at the same time that an input is active
(door opening, ignition, etc.), you will hear one chirp to indicate
arming and a second chirp a few seconds later to indicate Bypass
Notification. A Bypass Notification chirp means that the system
Arming Diagnostics
Remote-Controlled Valet