Clarion CS105 Automobile Alarm User Manual


 
Owner’s Manual - Page 5
Remote Locking
To Lock the System:
1. Turn off the ignition.
2. Press Button 1.
The siren will chirp once.
The doors will lock.
The parking lights will flash once.
The LED will begin blinking, indicating the optional Starter Defeat is activated*.
*If installed.
Remote Unlocking
To Unlock the System:
Press Button 2*.
The siren will chirp twice.
The doors will unlock.
The parking lights will flash twice.
The LED will turn off, indicating the optional Starter Defeat is deactivated**.
* When the transmitter operation is set for Standard Mode, press Button 1 to Unlock.
**If installed.
Silent Locking / Unlocking
Each Remote Transmitters can be individually set to Lock and Unlock the system with or without
chirp confirmation at the time they are programmed into the system (see Adding a New
Transmitter into the System).
To temporarily cancel the Locking and Unlocking confirmation chirps, you can Lock or Unlock the
system by pressing Buttons 1 and 2
together
.
If the system was programmed to lock the system
without
chirp, pressing Buttons 1 and 2 together will lock the
system
with
chirp.
Panic Mode
Allows you to instantly trigger the alarm in an emergency situation by the Remote Transmitter.
To enter Panic Mode:
1. Press and hold Button 1 for 2 seconds.
The system will trigger.
2. Press Button 2 to stop Panic Mode.*
If Panic Mode is not stopped by the Remote, it will automatically time out after 40 seconds, and
the system will return to its prior Locked/Unlocked state.
* When the transmitter operation is set for Standard Mode, press Button 1 to stop Panic Mode.
Basic Features
owners_105OEM.qxd 9/14/99 5:21 PM Page 5