Filter
Top Products
Multi-Car Operation
If you want to control multiple systems by a single Remote Transmitter, an optional 3-Button
Remote Transmitter is available. The 3-Button Remote Transmitter gives you the convenience
of operating several vehicles from a single Remote Transmitter.
For more information about Multi-Car operation, see your Dealer.
Adding a New Transmitter into the System
The system has the ability to recognize up to 20 individual remote transmitters. If the vehicle is
used by multiple drivers, each can have their own Remote Transmitter.
To add a Remote Transmitter:
1. Turn on the ignition.
2. Press and hold the Override switch.
• The status LED will turn on red.
3. Within 5 seconds:
Continue holding the Override switch
and Press Transmitter Button 1 for remote
locking
with
chirp confirmation.
--- or ---
Release the Override switch
and Press Transmitter Button 1 for remote locking
without
chirp confirmation.
• The status LED will flash once quickly to confirm that the new Remote Transmitter
has been added.
4. Turn off the ignition.
Deleting Transmitters (Adding a Remote Transmitter
and
Erasing All
Other Remote Transmitters From the System)
1. Turn on the ignition.
2. Press and hold the Override switch.
• The status LED will turn on red.
Continue to hold the Override switch.
• After 5 seconds, the status LED will flash 4 times, then turn on red again.
3. Within 5 seconds:
Continue holding the Override switch
and Press Transmitter Button 1 for remote
locking
with
chirp confirmation.
--- or ---
Release the Override switch
and Press Transmitter Button 1 for remote locking
without
chirp confirmation.
• The status LED will flash once quickly to confirm that the new Remote Transmitter
has been added.
4. Turn off the ignition.
Owner’s Manual - Page 3
owners_105OEM.qxd 9/14/99 5:21 PM Page 3