Clarion CS105 Automobile Alarm User Manual


 
This System comes with:
Main Unit - The “brain” of the system.
2 - Two Button Remote Transmitters
Status LED - Red illuminated indicator that provides system status information.
Emergency Override Switch - used to override the system in case the Remote
Transmitters become lost or stolen.
Optional Features
The advanced design of the system incorporates a number of optional inputs and outputs
allowing you to create a customized convenience system by easily accommodating many
optional features such as:
Remote Transmitter Layout
The system comes with 2 Remote Transmitters used to control nearly all of the system’s
features.
Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is
taking place.
These Remote Transmitters may be used in one of three operating modes:
Convenience Mode,
Standard Mode,
and
Driver Door Priority Mode
.
Convenience Mode (default)
The system is pre-programmed to operate in the Convenience Mode which allows provides
separate Lock and Unlock buttons for greater convenience and ease of use.
Button 1 Locks the system and activates the optional Starter Defeat.
Button 2 Unlocks the system and deactivates the optional Starter Defeat. Pressing Button 2 again
activates the system’s Auxiliary Function.
If the system is Locked, pressing Button 2 will Unlock the system.
If the system is Unlocked, pressing Button 2 will activate the Auxiliary Function.
Remote Transmitters
About Your Convenience System
Owner’s Manual - Page 1
Starter Disable
Remote Window Control
Remote Car Start
Extended Range Antenna
Power Trunk / Hatch Release
Garage Door Receiver
Button 1
Button 2
LED
owners_105OEM.qxd 9/14/99 5:21 PM Page 1