Filter
Top Products
NAVIGATION MENU
36 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
Settings
From the main menu tap to access the Change Preferences screen. There are 6
options available which you can set.
Language
`Tap to open the Language setting screen;
here you can chose from 5 available
languages. When a language is selected not
only will it affect the text on the screen, but it
will also change the voice command
language to the chosen language. The
currently selected language choice is
indicated with a blue tick. Once the language
has been selected tap Done to confirm.
Tap default to set the language back to the default setting, you will have to press
Done to confirm this setting.
Tap Cancel to exit without making any changes.
Set Home Address
Allows you to set your home address using the same methods as described under
the Navigate to section (see page 18). Once set allows you to use the option Go
Home from the Main Menu.
Units
This option allows you to choose if you want the distances shown on the map and in
the Voice commands to be in either miles or kilometres. The option which is
highlighted white is the option which is currently selected.
Brightness
Tap to change the brightness of the screen. Use the Left/Right arrows to change the
level, the current level will be indicated on the bar.
Tapping Default will reset the brightness back to the default state.
Tapping cancel will exit without saving any of the changes you have made.
Tapping Done will save any changes and exit.