Chrysler 2006 Crossfire Automobile User Manual


 
Forward/Rearward
Pull up on handle 4.
Move the seat forward or backward to your desired
position which allows you to reach the pedals com-
fortably.
Let go of handle 4. The seat should make an audible
click when positioned properly.
Check for proper engagement before driving.
Backrest Tilt
Turn handwheel 2 forward or backward to adjust the
backrest tilt to your desired position which allows
your arms to slightly bend when holding the steering
wheel.
Head Restraint Height
WARNING!
For your protection, drive only with properly posi-
tioned head restraints.
Adjust head restraint to support the back of the head
approximately at ear level.
Do not drive the vehicle without the seat head
restraints. Head restraints are intended to help re-
duce injuries during and accident.
Adjust the height of the head restraints by pulling
them upwards manually.
For a lower position, press release button 1 and push
down on the head restraints manually.
Adjust to a comfortable seating position that still allows
you to reach the accelerator and brake pedal safely. The
position should be as far to the rear as possible, consistent
with ability to properly operate controls.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 71
3