Chrysler SRT6 Automobile User Manual


 
NOTE:
Always test the operation of all lights after
service operations have been performed to validate an
effective repair.
Headlight Aiming
The headlights on your new vehicle were aimed at the
factory. The factory setting was made at a no load setting.
A great increase in weight will change the aiming and it
may be necessary to readjust the headlights if carrying an
excessive amount of weight in the rear cargo area. To
readjust the headlights first mark the position of the
headlights on a wall prior to loading the vehicle. Load
the vehicle and then readjust the headlights to the
original position. If any further adjustments are neces-
sary contact your manufacturers dealer. A detailed ser-
vice procedure is contained in the manufacturers Service
Manual. Information on purchasing a Service Manual can
be found at the back of this Owners Manual.
VEHICLE STORAGE
We recommend that you follow these guidelines before
storing your Crossfire for extended periods.
Fill the gas tank. This will prevent water condensation
inside the tank. If you plan on storing your vehicle
more than two months, add an anti-oxidant fuel
stabilizer to the gas tank.
Change the oil to remove any corrosive combustion-
related acids in the crankcase.
Wash and wax the vehicle to protect the finish.
Cover the vehicle whenever possible to prevent acci-
dental damage to the finish.
Store the vehicle in a dry, well-ventilated location.
MAINTAINING YOUR VEHICLE 231
7