Chrysler 2007 Sebring Sedan Automobile User Manual


 
This dehumidifies the air to help dry the windshield. To
improve fuel economy, use these modes only when
necessary.
Recirculation Control
Use this button to choose be-
tween outside air intake or
recirculation of the air inside
the vehicle. A lamp will illu-
minate when you are in recir-
culate mode. Only use the re-
circulate mode to temporarily
block out any outside odors,
smoke, or dust and to cool the
interior rapidly upon initial
start up in very hot or humid
weather.
NOTE:
Continuous use of the recirculation mode may make
the inside air stuffy and window fogging may occur.
Extended use of this mode is not recommended.
In cold or damp weather, the use of the recirculation
mode will cause windows to fog on the inside because
of moisture build up inside the vehicle. For maximum
defogging, select the Outside Air position.
In order to prevent fogging, when the recirculation
button is press and the mode control is set to panel or
panel / floor, the A/C will engage automatically.
The A/C can be deselected manually without disturb-
ing the mode control selection.
Air Outlets
The airflow from each of the instrument panel outlets can
be adjusted for direction and turned on or off to control
air flow.
NOTE:
For maximum airflow to the rear, the center
instrument panel outlets can be aimed, so that they are
directed toward the rear seat passengers.
Economy Mode
If economy mode is desired, press the A/C button to turn
off the indicator light, and the A/C compressor. Move the
temperature control lever to the desired temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 193
4