Filter
Top Products
Procedure to Update the Variance:
1. Turn the ignition switch to the ON position while
leaving the transmission selector in PARK.
2. Press the Step Button Several Times until “Personal
Settings” is displayed in the EVIC window.
3. Once in “Personal Settings,” Press the STEP button
until “Compass Variance” and the current value displays
in the EVIC window.
4. Press and release the RESET Button to increment the
Variance Value by one, (one button press per update),
until the proper variance zone is selected according to the
map.
NOTE:
The Variance values will wrap around from 15
back to 1. The Default Variance is Zone 8.
5. Press and release the RESET button to exit. Press the
STEP button if you wish to calibrate the compass manu-
ally (see: “Manual Compass Calibration” listed above).
152 UNDERSTANDING YOUR INSTRUMENT PANEL