Filter
Top Products
LIGHT FLASH
If your vehicle has remote keyless entry, this feature,
which allows the vehicle’s exterior hazard/turn signal
lighting to flash every time the lock or unlock button on
the remote keyless entry transmitter is pressed, can
be enabled or disabled. When LIGHT FLASH appears
on the display, press the reset button to scroll
through the available settings:
OFF: The exterior hazard/turn signal lighting will not
flash when the lock or unlock button on the remote
keyless entry transmitter is pressed.
ON (default): The exterior hazard/turn signal lighting
will flash when the lock or unlock button on the remote
keyless entry transmitter is pressed.
See Remote Keyless Entry System Operation on
page 2-4 for more information.
Choose one of the available settings and press the
information button to select it and move on to the
next feature.
DELAY LOCK
This feature, which delays the actual locking of the
vehicle, can be enabled or disabled. When DELAY
LOCK appears on the display, press the reset button to
scroll through the available settings:
ON (default): The doors will not lock until five seconds
after the last door is closed. You can temporarily
override delayed locking by pressing the power lock
switch or the lock button on the remote keyless
entry transmitter a second time.
OFF: The doors will lock immediately when pressing
the power lock switch or the lock button on the remote
keyless entry transmitter.
See Power Door Locks on page 2-8, Delayed Locking
on page 2-8, and Remote Keyless Entry System
Operation on page 2-4 for more information.
Choose one of the available settings and press the
information button to select it and move on to the
next feature.
3-45