Filter
Top Products
Center High-Mounted
Stoplamp (CHMSL)
To replace the center high-mounted stoplamp bulb:
1. Open the liftgate. See Liftgate on page 2-12.
2. Remove the center trim located near the top of the
liftgate.
3. Turn the bulb socket counterclockwise and pull it
straight out of the lamps assembly.
4. Pull the old bulb straight out of the bulb socket.
5. Push the new bulb straight into the bulb socket until
it clicks.
6. Push the bulb socket straight into the lamp
assembly and turn it clockwise to lock it into place.
7. Reinstall the center trim.
5-49