Vermont Casting 2008 Motorcycle User Manual


 
Part I - 16
Put foot down or hit cone.
Fail to complete left turn or travel outside of boundary.
Skid to a stop.
Fail to stop within the borders of the box.
y RUN #2 ~ Illustration B ~ Cone Weave/U-Turn:
You will be required to travel to the left between a set of cones
then weave back to the right around the next cone. The weave
continues alternately around three more cones. Upon completing
the weave you turn right and come back down the outside of the
course to the enclosed area of the starting point making a right
U-turn within course area.
You will lose points if you:
Put feet down.
Hit cone or line.
Skip a cone.
Your tires hit or cross the U-turn borders.
y RUN #3 ~ Illustration C ~ Quick Stop:
This exercise tests your ability to make a quick stop while
coordinating both the front and rear wheel brakes with specific
requirements put on the speed you should attain and proper
stopping distance for that speed. This test will be timed.
To perform this exercise you will ride to the opposite end of the
course and starting at that point ride in a direct line between the
cones at about 15 M.P.H. When your front tire reaches the cones,
stop as quickly and as safely as you can using both brakes.
You lose points if you:
Fail to stop within an established guideline.
y RUN #4 ~ Illustration D ~ Obstacle Swerve:
This exercise tests one's ability to avoid "in-road" obstacles.
Riding in a straight line and at the same speed as Test #3, you
will be instructed to swerve right or left at the last set of cones so
that you will avoid hitting the 7' barrier line with either tire. This
barrier line is located 13' from the last set of cones.