Vermont Casting 2008 Motorcycle User Manual


 
Part I - 14
T – Tires and Wheels
y Air pressure
y Tread
y Cracks, dents, loose spokes
y Bearings
y Brakes
C – Controls
y Levers
y Switches
y Cables
y Hoses
y Throttle
L – Lights and Electrics
y Working condition
O – Oil and Other Fluids
y Levels
y Leaks
C – Chassis
y Suspension
y Drive components (chain, belt, or drive shaft)
S - Side stand
y A pre-ride inspection should not take more than a few
minutes. If done before every ride, it can help you identify
changes before they become a problem.
Annual Inspection:
Your motorcycle or moped must be inspected once each year by an
authorized motorcycle or moped inspection station. All uninspected
motor vehicles, including motorcycles and mopeds, must be
inspected within 15 days from the date of registration. The
inspection decal shall be attached to the left outer side of the
windscreen as low as possible or shall be attached to the left front
fork.
Your motorcycle or moped will be required to have an adequate
headlight, rear view mirror, horn, adequate hand and foot brakes,