Filter
Top Products
After arriving at your destination, Turbo Timer keeps the engine running for a programmable time
period of 1, 3 or 5 minutes. This allows the engine’s turbo charger time to conveniently cool down
after you have left the vehicle.
To Activate:
1. While the engine is running, set the emergency brake and place the transmission into "Park".
2. Before turning off the engine, press and release and buttons at the same time. The parking
lights will flash indicating the remote start has entered Turbo Timer Mode.
3. Remove the ignition key and the engine will keep running.
4. Exit and secure the vehicle. The engine continues running until the pre-programmed time has
elapsed.
16
If any of the following conditions exist while the system is operating, the engine will not start or will
shut down immediately:
1. The hood is opened.
2. The brake pedal is pressed.
3. Engine is over-revved (Tachometer Checking Type only).
4. The preprogrammed run time (5/10/20/30 minutes) has elapsed.
5. Press the button twice on the remote transmitter under Remote Start Mode.
6. Move the optional remote start enable toggle switch to “OFF” position (if installed).
7. The vehicle refused to start running after 3 unsuccessful attempts.
Remote Start Shutdown Inputs
Turbo Timer Mode
PLUS6900-UM.qxp 4/30/09 3:48 PM Page 16