Filter
Top Products
Checking the Fluid Level
Prepare the vehicle as follows:
1. Park the vehicle on a level place. Keep the engine
running.
2. With the parking brake applied, place the shift
lever in P (Park).
3. With your foot on the brake pedal, move the shift
lever through each gear range, pausing for about
three seconds in each range. Then, position the
shift lever in P (Park).
4. Let the engine run at idle for three to five minutes.
Then, without shutting off the engine, follow these
steps:
1. Locate the transmission fluid cap which is located
next to the radiator hose and below the engine
air cleaner/filter assembly on the driver side of
the vehicle. The cap is marked TRANS FLUID.
See Engine Compartment Overview
on page 6‑14
for more information on location.
2. After removing the engine air cleaner/filter
assembly to reach the transmission fluid cap, turn
the cap counterclockwise to remove. Pull out the
dipstick and wipe it with a clean rag or paper towel.
3. Push it back in all the way, wait three seconds, and
then pull it back out again.
6-22