Filter
Top Products
Entering an Address
To set a destination by entering a street address:
1. If the radio is already on with a map disc inserted,
skip to Step 5.
2. Press the PWR/VOL knob to turn the system on.
3. Insert the DVD map disc. See “Regional Maps”
under Maps on page 4-38 for more information.
4. A notice may appear. Touch the I AGREE screen
button to proceed.
5. Press the ROUTE hard key.
6. Press the Enter Destination screen button.
Verify the selected Search Area is correct.
7. Press the Address screen button.
8. Press the Street screen button, then enter the
street name using the alpha keypad on the
screen.
Do not enter directional information or street type,
and use the space screen button between street or
city names. For example, the street name N. Royal
Oak Rd. should be entered as royal oak.
Use the backspace (
V ) screen button if an
incorrect character has been entered.
9. Select the desired street name with the correct
designation (Dr., Ln., St., etc.) from the list.
10. If there is more than one city, the system displays
the list of cities that have that street name. Select a
city from the list or select the City screen button
to input the city name.
11. Enter the house number using the numeric keypad
on the screen and touch the Enter screen button.
The system lists the house number range available
for the street.
12. Press the Enter screen button to plan the route.
See “Address” under Enter Destination on page 4-27 for
more information.
4-7