Cadillac 2007 Escalade EXT Automobile User Manual


 
Holding the turn signal lever for more than
one second will cause the turn signals to flash
until you release the lever. The lever will return
by itself when it is released.
An arrow on the
instrument panel
cluster will flash in
the direction of the
turn or lane change.
As you signal a turn or a lane change, if the
arrows flash more quickly than normal, a signal
bulb may be burned out and other drivers will
not see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when
you signal a turn, check for burned-out bulbs and
a blown fuse. See Instrument Panel Fuse
Block on page 510 and Underhood Fuse Block
on page 513.
Turn Signal On Chime
If your turn signal is left on for more than
3/4 of a mile (1.2 km), a chime will sound at
each flash of the turn signal and the message
TURN SIGNAL ON will also appear in the
DIC. See DIC Warnings and Messages on
page 248. To turn the chime and message off,
move the turn signal lever to the off position.
Headlamp High/Low-Beam Changer
53(Headlamp High/Low Beam Changer): To
change the headlamps from low to high beam, push
the lever toward the instrument panel. To return to
low-beam headlamps, pull the multifunction lever
toward you. Then release it.
When the high beams
are on, this indicator
light on the instrument
panel cluster will
also be on.
197