Filter
Top Products
Retrofit Instructions
Installing a Sport Heated Steering Wheel - Leather, Multifunction
BMW X5, E53, 2001 – 2006
______________________________________________________________________
Disclaimer:
This set of instructions is simply a guide on how I installed my own heated steering wheel. These
instructions are not meant for sale nor are they intended for vehicle or parts resellers. All pictures and
information is the copyright of the owner and may not be copied in any part or whole. If you choose to
follow these instructions for your own vehicle, I am not liable for any defects or damages that may occur
as a direct or indirect result of this document. Any work done on your vehicle is at your own risk. If you
have any questions please contact arvi.singh@shaw.ca
Instructions written by Arvi Singh
Note: Check to see if your vehicle is prewired
Most E53’s are already pre-wired for heated steering although the necessary switching relay is not
installed and the required steering column switch is not installed. Check FUSE 29 in the glovebox
compartment. If there is a 10amp fuse in place, your vehicle is already pre-wired. If no fuse is present,
you can still install this steering wheel with an alternative power source switched through the ignition. Be
sure to put an in-line 10amp fuse before proceeding with this method.
Tools Required:
Phillips & Flat head screwdriver, Torx T-20, Torx T-27, 16mm socket & Torque wrench with 6” extension.