Beltronics V960/V940 Radar Detector User Manual


 
22
greater the displacement of the beam and the
shorter the dwell time of the beam at the target
point. Therefore, there is the possibility of receiving
only a few Laser pulses. Due to these characteristics,
all Laser alerts should be taken seriously.
Safety Warning System
®
(SWS
) Alerts
With the Safety Warning System
®
feature ON and an
SWS
transmitter in use, your detector will provide a
unique, 2 second SWS
tone coupled with a Safety
Warning System
®
category word (i.e.
HHaa zz dd ZZoo nn ee
indicating Highway Hazard Zone Advisory) to quickly
orient you to the type of situation ahead. This
introductory message is followed by a specific Text
Message (i.e.
SSHHAARRPP CCUURRVVEE AAHHEEAADD
) and Digital
Voice Message which is repeated twice. After the
Digital Voice, the unit will continue to present the
message and provide the “clicking“ tone for as long as
an SWS
signal is detected. If two separate SWS
messages are received, each message is presented
twice before the “clicking” resumes.
You can replay the last SWS
message received by
pressing the DRK button within 30 seconds of
receiving an SWS
alert. Both Digital Voice and Text
Message are replayed.
If you have selected “
SSWWSStt oo nn ee
(Digital Voice off),
your unit will show just the Text Message (see
Selectable Features, page 11).
Note—the end of a multiple word SWS
message is
indicated by an asterisk.
VECTOR 940 provides only Digital Voice and Text
Messages for the FIVE SWS
categories and not all
60 individual messages.
k