Filter
Top Products
22
© 2008 Directed Electronics—All rights reserved
down the turbo after you have left the vehicle.
To activate:
1. Park the vehicle and set parking brake.
2. Remove your foot from the brake pedal and leave the engine
running.
3. Press and release the and buttons at the same
time.
4. The lights will flash to indicate the remote start has entered
short run turbo mode.
5. Turn off the key, the engine will keep running.
6. Exit and secure the vehicle.
7. The engine will turn off after the programmed run time.
Safety features
This system has several important safety features to ensure proper
operation of the motor and prevent accidental damage to the
engine or its components.
Starter anti-grind circuitry
Whenever the vehicle is remote started, advanced anti-grind
➜
G5103_2008-06F.qxd 7/9/2008 10:39 AM Page 22