Filter
Top Products
27
© 2004 directed electronics, inc.
➤ Press a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
arming while driving
Your security system can be armed while driving the vehicle!
Simply press on the remote for two seconds while the
vehicle is running. The siren will chirp once to indicate that the
security system is armed, and then once more to indicate that the
ignition is on. The system will not respond to any input except
the door triggers, and the starter kill relay (if installed) will not
be activated. Once you have arrived at your destination, the
system will disarm when the ignition is turned off. The siren will
chirp twice and the LED will then stop flashing. The system can
also be disarmed at any time by pressing .
The LCD 2-way remote will beep once (or vibrate), and the arm
icon (29) will be displayed on the LCD.
note: If the transceiver received a Warn Away
®
or triggered
response page while armed, the first press of the unlock
button will clear the page alert. A second press will turn
the siren off, and a third press will disarm the system.
➜
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.