Audiovox NPC5000 GPS Receiver User Manual


 
Mounting instructions
48
Installing metal sleeve, ill 2 - 3
The computer can be mounted in a DIN radio opening of the vehicle with the
supplied metal sleeve.
Please note before mounting, ill. 4:
To ensure access to the CD opening a free space of at least 130 mm has to be in
front of the navigation computer.
For sufficient air circulation a free space of at least 50 mm has to be behind the
navigation computer.
The navigation computer has to be installed in horizontal position. A deviation
of - 10 to + 30 degrees can be adjusted within the diagnosis menu (see “Initial
start-up”). Greater deviations can cause malfunctions.
A stable connection to the car body is necessary for the computer to function
correctly!
Insert metal sleeve into the DIN opening and press appropriate tags outwards with
a screwdriver. Take care not to damage hidden parts in the dashboard.
Installing GPS antenna, ill. 5 - 6
The GPS antenna
3
can be mounted in the vehicle interior, for example on the
dashboard or on the hatshelf. The antenna must have clear “view” of the sky.
In vehicles with metallic window tinting the GPS antenna should be mounted
outside on the vehicle body, for example on the roof or in the plastic bumper.
On metal surfaces the antenna can be fixed magnetically. Therefor remove the
metal plate from the bottom of the antenna and place the antenna on the
cleaned surface.
When mounting on other surfaces the metal plate has to remain below the
antenna. In this case stick install antenna with double-sided adhesive tape.
Note:
To ensure perfect function please keep a distance of at least 4 inches to metall
parts like window frame.
Installing holder for the remote control (Accessory), ill. 7 - 8
Mounting on angle bracket
Screw holder to angle bracket. Either insert angle bracket into an available slot or
screw it in place.
Mounting with adhesive plate
Snap holder onto plastic plate. Remove protective paper from adhesive tape. Stick
holder with adhesive plate onto mounting surface and press firmly.
Note:
Mounting temperature should be at least 60 degrees Fahrenheit to ensure the
full adhesive effect of the tape.
Audiovox_MS5000.book Seite 48 Donnerstag, 9. November 2000 3:41 15