Filter
Top Products
Guidance
31
English
Route Criteria
You can choose between four different criteria for calculating the driving route:
• Fastest (
t
)
suitable for every situation
•Shortest (
d
)
recommended for journeys within cities
• Main roads (
w
)
recommended if you prefer routes via main roads
• No main roads (
W
)
recommended if you prefer to avoid routes via main roads
The symbol for the route criterion selected (see symbol in brackets) is shown in
the status line
Adjust / change route criteria:
— Select the “Settings” function in the “Start Menu”.
The “System Settings” menu appears.
— Select the “Route Selection” function.
A list appears with the route criteria described in the above.
— Activate the “Minmize toll roads” option if you want to use the least possible
number of toll roads (option with display
activated).
ஊ
The option “Avoid Toll Roads” is supported only by the corresponding
information on the map
CD
. For this reason, the calculated route may contain toll
roads despite the activation of this option. Route planning can take longer with the
“Minmize toll roads” option activated than when the option is deactivated.
Therefore this option should only be activated if it is needed.
If no toll-free roads are available, then toll roads are used for planning the route.
— Select the desired route criterion (see above).
The symbol for the newly selected route criterion is shown in the status line.
ஊ
The route criterion “Route Selection” can also be changed during guidance. For
this you must select the “Info” function in the function list of the guidance screen.
Audiovox_MS5000.book Seite 31 Donnerstag, 9. November 2000 3:41 15