Filter
Top Products
Operation
22
Stand-by
If you do not need the map display or visual directional information, then you can
switch them off.
— Select the “Stand-by” option in the Start Menu.
The display is switched off; audible messages (e.g. directional information,
if “Guidance” has previously been activated) continue to be provided.
In order to turn the display on again (turn off Stand-by), press one of the cursor
buttons
4
,
6
,
8
,
2
or the
OK
-button on the remote control.
ஊ
If the system is switched off in stand-by mode it restarts in stand-by mode when
the ignition is switched on again.
Adjust navigation system
You can change several settings to adapt the navigation system to meet your
personal requirements. The following functions are available in the “Settings”
menu.
• Language
• Route selection
• Screen config.
• System information
• Security module
• Traffic information
• Measuring units
•Date/Clock
• Volume control
The menu is invoked in the “Start Menu” by selecting the option “Settings”.
ஊ
All of the settings that you make on the system are stored after it is switched off.
“Language” function
Selection of the national language for audible information and menu texts in
the display.
Selecting languages see “Changing the language” on page 25.
“Route selection” function
Selection of criterion for route planning, see “Route Criteria” on page 31.
Audiovox_MS5000.book Seite 22 Donnerstag, 9. November 2000 3:41 15