Audiovox APS 686 Remote Starter User Manual


 
128-6567
1 of 4
4 Channel Remote
Car Starter
FEATURES :
w 2 Four Button Programmable RF Transmitters
w Four Channel Receiver (capable of accepting 4 transmitters)
w Code Hopping Technology
w Remote Start Safety Control Switch
w Safe Start RF Control (Double Push Of RF Transmitter)
w Selectable Automatic Timed Start Mode
w ( + ) and ( - ) Keyless Entry Outputs
w On-Board Start Relay
w On-Board Accessory Relay
w On-Board Ignition 1 Relay
w On-Board Ignition 2 Relay
w On-Board Parking Light Relay
w Ignition 2 Relay Selectable On or Off During Cranking
w Ignition 3 / Shock By-Pass / GM VAT Output (relay required)
w Tach Signal Learning Circuit
w Two ( + ) and Two ( - ) Safety Shutdown Circuits
w Alarm By-Pass Output
w Channel 3 Output for Remote Trunk Release (relay required)
w Channel 4 Output to Control Optional Accessories
w Selectable Steady or Flashing Parking Lights for Run Indication
w Selectable Run Times
w Selectable Door Lock Output Pulse Timing
w Optional Illuminated Entry Output (Relay Required)
w Vehicle Horn Activation Output For R/S Annunciation
w External Activation Control Input
OPTIONS:
w Remote Power Window Control
w Remote Garage Door Interface
w Multiple Vehicle Capable
CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle
starting device. A running engine produces dangerous carbon monoxide fumes
which can be harmful or fatal if prolonged exposure occurs. DO NOT remote
start the vehicle if the car is garaged.
Model APS 686
Owner’s Manual