Filter
Top Products
32
Some video devices are equipped with a component video output terminal. You can use an
optionally available VESA to component video adapter (SP-VESA-ADPT-R) and a
component video cable to connect the RGB input terminal of the projector to the component
video output terminal of a video device.
Important!
Always turn off the projector and the video device before connecting them.
z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to
match the colors of the plugs on the optional adapter with the colors of the terminals
(Green: Y; Blue: Cb/Pb; Red: Cr/Pr).
z Note that connection only to an analog component video output terminal is supported.
Connection to a digital output terminal is not supported.
Connecting to a Component Video Output Device