Filter
Top Products
17
Projection
Mode
RCVUN Single Use this sub-menu to specify whether projection will be
from the front of the screen or the back of the screen.
*:
Select this option when projecting from the front of the
screen.
:
Select this option when projecting from the back of the
screen.
:
Select this option to flip the back-projected image
vertically.
:
Select this option to flip the image vertically.
Important!
The lamp originally installed in this projector is
model SP-LAMP-035, which is intended for tabletop
(non-inverted) use. Do not use this lamp in ceiling
mounted (inverted) applications. For ceiling mount
(inverted) application, use lamp model SP-LAMP-
036 instead, which is specifically designed for that
purpose. Use of the wrong lamp will significantly
reduce lamp life and void the lamp warranty (and
if use of the wrong lamp results in damage to the
projector, it will also void the projector warranty).
Startup Screen RCVUN Single Use this sub-menu to specify whether or not a startup
screen should be projected whenever the projector is
turned on.
Logo*:
Select this option to project the projector’s built-in logo
screen at startup.
None:
Select this option when you do not want to project a
startup screen.
No Signal
Screen
RCVUN Single Use this sub-menu to specify what should be projected
when there is no input signal to the projector.
Blue*:
Select this option to project a blue screen.
Black:
Select this option to project a black screen.
Logo:
Select this option to project the projector’s built-in logo
screen.
Setting Name Input
Setting
Unit
Description