Filter
Top Products
16
About the “Signal Specific” Setting Unit
For the items that have “Signal Specific” in the “Setting Unit” column of the above table,
the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is
being input when the setting is performed, and not for a specific input source.
Screen Settings Main Menu
Setting Name Input
Setting
Unit
Description
Keystone
Correction
RCVUN Single Use this sub-menu to correct vertical keystoning of the
projected image.
Aspect Ratio RCV Source
Specific
Use this sub-menu to select one of the following aspect
ratios for the projected image.
4:3*:
This setting specifies a 4:3 aspect ratio, which is the
same as a standard television.
16:9:
This setting specifies a 16:9 aspect ratio, which is the
same as a movie screen, high-definition TV, etc. Using
this setting when the input source image is a 16:9 image
that has been squeezed to a 4:3 image causes the
image to be projected with its normal 16:9 aspect ratio.
Note
When the input source is a component signal with
an aspect ratio of 16:9, the aspect ratio switches
automatically to 16:9. When this happens, the
aspect ratio cannot be changed using this setting.
Important!
Note that enlarging or reducing the size of an
image for commercial purposes or public
presentation may infringe on the legally protected
copyright of the copyright holder of the original
material.