Arkon CM090-2 Automobile Accessories User Manual


 
CM097 Lighter Socket with Power Adaptor Mounting Pedestal
Consumer Hotline:
(USA) (800) 841-0884
(INT'L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
© Copyright 2007 Arkon Resources, Inc.
The Mobile Mounting Specialists
TM
SM020
CM097
-Also available with dual T-head configuration
-Also available with dual T-head configuration
CM097
CM090
SM020-2
CM097-2
CM097-2
CM090-2
12V Powering
Outlet socket
Step 1.
Step 2.
Step 3.
Insert the DC Power plug (A) completely into the vehicle's
12V/lighter socket.
Adjust the angle of the pedestal arm by loosening/tightening
the wing nuts (B) to the desired placement angle.
Attach your cradle or device to the pedestal by inserting the
single T-tab (C) into the T-slot (D). Adjust the angle and
rotation of the head by loosening/tightening the wing nuts
(B).
Installation Instructions
(F)
(G)
(E)
(A)
(B) (C)
(D)
Step 1.
Step 2.
Step 3.
Universal Cradle Instructions (Sold Separately)
If necessary, adjust the support legs (G) by sliding them
laterally. These provide support for your device.
Place device on the support legs (G) and squeeze the side
grip arms (E) until they fit securely to the device.
Push the release button (F) in order to release the device from
the cradle.
(Sold Separately)
(Sold Separately)
(Sold Separately)
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no
responsibility of liability for injury or death as a result of car crashes
and/or air bag deployment.
Arkon Resources, Inc. is not responsible for any damages caused to
your car, your device, or yourself due to the installation or use of the
pedestal mount.